Description
General description
The HPSD 5100 is pressure transducer in a miniature metal housing for industrial applications. Input pressure is sensed with siliconpiezoresistive bridge. Measured pressure is transformed into standard output voltage range from 0.5 to 4.5V or other.
A switching output is integrated in transducer, which can be externally adjusted with potentiometer and switching level seen with LED indicator. Temperature compensation and calibration is performed by programmable digital signal conditioner.
Wide supply range 7 to 40 V, standard 0,5 to 4,5 V voltage output, digital output and switching output provides users maximum freedom for any type of application with dry air or non-corrosive gases and liquids.
Small size and robust M8 threaded housingis very convenient for applications with limited space. Total length is less than 40 mm with standard M8 electrical connector.
The whole group consists of pressure ranges from 20 mbar to 7 bar. Gage pressure configuration available for this group.
| Tehnical data | Value |
|---|---|
| Excitation | |
| Media | dry-air, non-corosive gases, liquids |
| Pressure Ranges | 10 mbar ÷ 7 bar |
| Package | / |
| Accuracy | up to ± 1% FS |
| Dimensions | Ø8 x 33,8 mm |
| Special features | standard M8 electrical connector, sensor and switch simultaneously |
| Temperature range | -25°C ÷ 85°C |
| Temperature compensation rate | 0°C ÷ 70°C |
| Output | digital I2C (< 15 bit) or SPI |
| Type/Configuration | gage |
