Rotary Encoders (QR series)

The QR series of rotary encoders enable contact-free measurement of an angular displacement from 0° to 360° without a mechanical stop. Two types of housing are available. The QR30 housing, where the sensor and magnet are mounted separately from each other, and the QR40 housing, where the magnet is integrated into the rotating shaft in the housing.

Description

Description

QR30(N)

In the QR30 range, the sensor and magnet are mounted separately from each other, where the customer can mount the supplied magnet on its rotating axle (on-axis). The maximum distance of 3 mm between the magnet and the sensor provides sufficient space for mechanical tolerances under extreme conditions. Various outputs are available with a 10 or 12-bit resolution for a wide range of applications. While the back of the QR30 sensors is being sensitive, the QR30N sensors have got a sensitive nose.

“Absolute” vs. “incremental”

The QR30 series is available as absolute or incremental rotary encoders. An absolute rotary encoder contains an analog output which is linear with the angle of rotation, up to 360°. After switching on the power the sensor knows directly in which position it is located.
An incremental encoder is specially suitable for rotational velocity of a shaft. The output of the sensor consists of pulses (A and B). The number of pulses per revolution can be between 32 and 1024. On the basis of the phase shift between the A and B signal can be determined if the shaft rotates clockwise or counterclockwise.

QR40

In contrast to the QR30 series, in the QR40 series of rotary encoders the magnet is built into the sensor. The standard shaft is D-shaped. The QR40 also has a zero-input, which makes it possible to zero the device after installation, ensuring a non-critical mounting procedure.

Functions

Replacing potentiometers, measurement of angle, speed and direction

Applications

Agricultural machinery, excavators, mobile and fixed waste compacters, valve control, robotics

The rotary encoder housing

Many of the DIS sensors in the QR-series use a unique universal plastic housing concept, known as QUADRO®. The advantage is the very compact size, simple installation and the fact that the electronics are fully sealed which provides a high degree of ingress protection (IP67 for QR30 & QR30N and IP66 for QR40).

Types of rotary encoders

DIS rotary encoders are available with the following general specifications:

Measurement range: 0 – 360° (subranges possible)
Energy supply: 5 V dc or 10 – 30 V dc
Analogue output: 0 – 5 V or 4 – 20 mA
Digital output: A/B pulse (31 – 1,024 ppr) push pull, PWM, redundant
Level of protection: IP67 – (QR40: IP66)
Resolution: 0.09°
Housing: plastic

More information

Useful documents for QR sensors, like the family overview, EDS files and manuals, can be found under downloads.

Accessories

We have a wide range of accessories available to make sure the rotary encoder will perform at its best potential. Please take a look at accessories for an overview. If you are looking for an accessory that’s not on the list, please don’t hesitate to contact us.

Product selector

Use the product selector to help decide which type of rotary encoder is best suited to your specific needs. If you can’t find the sensor you want, contact us. Together, we may be able to find you a sensor or develop one that will meet your requirements.

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping